17TS Oversized pulley wheel System manufacturers and suppliers | Kactus

17TS મોટા ગરગડી વ્હીલ સિસ્ટમ

લઘુ વર્ણન:

Bicycle Rear Derailleur Pulley Road Bike 17TS For Shimano Product description *17T large size guide wheel set system *17T pulleys or16T pulleys *Saves 60% chain friction resistance compared to 11T guide wheels” *Ceramic bearing version saves more than 2.4 watts of average power compared to the original shifting system *Full carbon fiber cage *Full 7075 aluminum alloy CNC cutting lightweight guide wheel and shaft pin *17TS is suitable for Shimano 5800/5700/4700 /4600 105/Tiagra *Ceramic...


  • એફઓબી ભાવ: યુએસ $ 0.5 - 9,999 / પીસ
  • Min.Order જથ્થો: 100 ભાગ / પિસીસ
  • પુરવઠા ક્ષમતા: 10000 પીસ / મહિનો દીઠ પિસીસ
  • પોર્ટ: શેનઝેન
  • ચુકવણી શરતો: એલ / સી, ડી / એ, ડી / પી, ટી / ટી
  • ઉત્પાદન વિગતવાર

    design concept

    ઉત્પાદન ટૅગ્સ

    Bicycle Rear Derailleur Pulley Road Bike 17TS For Shimano

    72680401

    ઉત્પાદન વર્ણન

    * 17T વિશાળ કદ માર્ગદર્શિકા વ્હીલ સમૂહ સિસ્ટમ

    *17T pulleys or16T pulleys

    * 11T માર્ગદર્શિકા વ્હીલ્સ સરખામણીમાં બચાવે 60% સાંકળ ઘર્ષણ પ્રતિકાર "

    * સિરામિક બેરિંગ આવૃત્તિ મૂળ આવન-જાવન વ્યવસ્થાની સરખામણીએ વ્યવસ્થા સરેરાશ શક્તિ કરતાં વધુ 2.4 વોટ સાચવે

    * પૂર્ણ કાર્બન ફાઇબર પાંજરામાં

    * પૂર્ણ 7075 એલ્યુમિનિયમ એલોય CNC કટીંગ હળવા માર્ગદર્શિકા વ્હીલ અને શાફ્ટ પિન

    * 17TS Shimano 5800/5700/4700 માટે યોગ્ય છે / 4600 105 / Tiagra

    * સિરામિક બેરિંગ આવૃત્તિ સ્ટેઈનલેસ સ્ટીલ હાઇબ્રિડ સિરામિક બેરિંગ આવૃત્તિ સ્ટીલ બેરિંગ આવૃત્તિ

    * વજન: 71.4g

    * સિરામિક બેરિંગ આવૃત્તિ 1.2 ગ્રામ સ્ટીલ બેરિંગ આવૃત્તિ કરતાં હળવા છે

    *Shifting speed increased by 20%-26% for Shimano systems.

    *Color: Anode red, enamel, blue, gold, green

    *Support up to 11-28 cassettes, compatible with 11-30 and 11-34 with the help of an RD extender.

    This is the fastest RD pulley system.

    17TS & 17TR installation tips:

    1, due to increased offset by the oversized pulley system, please make sure your RD and frame are aligned and calibrated correctly.

    2, please check the length of your chain. Here is how to calculate, chain should be 10-20mm longer than the RD at 0 tension (shown as the picture below) when rests on the smallest chainring and smallest cog.

    3, to lower the requirements for chain length and RD/frame alignment, we introduce the new 16T pulley system, 17TS and 17TR. Compare with 17T, the power saving would be lowered by about 0.2 watts but increasing chain stability and shifting speed.

    图片1

    શા માટે derailleur ગરગડી વ્હીલ બદલો

    પ્રથમ, છિદ્રાળુ વસંત સ્થિતિ મર્યાદા મોટે ભાગે તણાવ પાછા સંતુલિત કરી શકે છે, મૂળ નબળા ઉંચાઇ ના નબળાઇ સુધારવા માટે, અને અપ અને સાંકળ તણાવ નીચે માર્ગદર્શિકા વ્હીલ અને cogs વચ્ચે વધુ પર્યાપ્ત છે.

    બીજું, સંપર્ક દાંત નંબર અથવા નિયંત્રણ સાંકળ અને પાછળના derailleur 17T ના Cogs વચ્ચે દાંત નંબર વધુ દરમિયાન ગિયર આવન-જાવન, તે માત્ર મધ્યમ અને કેટલાક લાકડીઓ બે બાજુઓ, મોટા નિયંત્રણ લીવર, મજબૂત નિયંત્રણ શક્તિ દબાવે કરવા માંગો છે.

    છેલ્લે, પછી પાંજરામાં પરિભ્રમણ વળાંક ફરીથી ડીઝાઇન બનાવવી, ઉચ્ચ માર્ગદર્શિકા વ્હીલ અને cogs વચ્ચે અંતર વધે છે.

     

    સ્થાપન પગલાંઓ

    image00111

    1.Remove પાછળના derailleur ગરગડી વ્હીલ પાંજરામાં: એક નં 2 હેક્સ સાધન ની મદદથી ગરગડી વ્હીલ પાંજરામાં આધાર બાજુ પર હેક્સ સ્ક્રુ દૂર કરો. (મૂળ ગરગડી વ્હીલ પાંજરામાં ફોટો દૂર કરવામાં આવી છે)

    image00311

    હેક્સ સ્ક્રુ 2.Remove, મૂળ ગરગડી વ્હીલ પાંજરામાં અને વસંત બહાર લાવો. (મૂળ ગરગડી વ્હીલ પાંજરામાં ફોટો દૂર કરવામાં આવી છે)

    image00511

    3. 17T કાર્બન ફાઇબર ગરગડી વ્હીલ પાંજરામાં, તમે 8 છિદ્રો 4 1 ચિહ્નિત જોઈ શકે છે તણાવ ગોઠવણ છિદ્ર, અન્ય ચાર વજન ઘટાડે છે. મૂળભૂત પ્રારંભિક માઉન્ટ હોલ 2. છે (તણાવ: 4> 3> 2> 1)

    image00711

    વસંત પિન પસંદ વસંત માઉન્ટ છિદ્રો 4.Install. ગરગડી વ્હીલ પાંજરામાં પર સ્ટેઈનલેસ સ્ટીલ-શાફ્ટ સ્થાપન પહેલાં greased હોવી જોઈએ.

    image00911

    પાછળના derailleur હોલ માં ગરગડી વ્હીલ પાંજરામાં 5.Push.

    image01111

    ગરગડી વ્હીલ પાંજરામાં 6.Rotating, પાછળના derailleur માં ગરગડી વ્હીલ પાંજરામાં પુનઃ મર્યાદા સ્ક્રુ બ્લોક કરી હતી.

    image01311

    7.સંપૂર્ણપણે પાછળના derailleur આધાર કે ગરગડી વ્હીલ પાંજરામાં ધકેલે છે.

    image01511

    8.પાછળના derailleur નં 2 હેક્સ સાધન ની મદદથી આધાર બાજુ પર છિદ્ર માં હેક્સ સ્ક્રુ દાખલ કરો.

    image01711

    9.સ્ક્રુ સજ્જડ.

    image01911

    10.વારંવારના રોટેશન ગરગડી વ્હીલ પાંજરામાં, સરળ પુનઃ પુષ્ટિ કરી લો, સ્થાપન પૂર્ણ થઈ છે.


  • ગત:
  • આગામી:

  • According to test result, increase the rear derailleur pulley wheel size could significantly decrease the friction between the chain plates caused by polygon effects during chain bending, and reduce the resistance for saving rider’s cycling power.

    The chain is composed of several short pieces with an inch long, we could see the chain as one inch long with around one hundred and ten section lines, due to small diameter of turning circle, when the lines pass through standard 11T pulley wheel, it needs a certain angle to turn the transferring direction of chain for about 180° through two wheels, after increasing the pulley wheel size, the chain turning angle are decreased, so the loss of friction is less correspondingly. The results shows that 17T is a good balance point between weight and decreasing the polygon effects, To increase the size blindly will lead to arc decreasing not obvious, together with weight and volume adding. Compared with common 11T pulley wheel, the friction loss caused by polygon effects of chain could be decreased about 60%.

    Besides, under the same transferring speed of chain, the axis rotation speed of 17T is slower for saving the self friction loss during bearing rotation, smaller cycle could also reduce the resistance of each turn rotation. To upgrade this ceramic bearing saves more power loss.

    Faster gear shifts. firstly, porous spring position limit could adjust back tension largely, improve the weakness of original weak stretch, and make the up and down chain tension between guide wheel and cogs much more adequately.

    બીજું, સંપર્ક દાંત નંબર અથવા નિયંત્રણ સાંકળ અને પાછળના derailleur 17T ના Cogs વચ્ચે દાંત નંબર વધુ દરમિયાન ગિયર આવન-જાવન, તે માત્ર મધ્યમ અને કેટલાક લાકડીઓ બે બાજુઓ, મોટા નિયંત્રણ લીવર, મજબૂત નિયંત્રણ શક્તિ દબાવે કરવા માંગો છે.

    છેલ્લે, પછી પાંજરામાં પરિભ્રમણ વળાંક ફરીથી ડીઝાઇન બનાવવી, ઉચ્ચ માર્ગદર્શિકા વ્હીલ અને cogs વચ્ચે અંતર વધે છે.

    And we should also tell customer that the compatibility of 11-28T cogs, the length of chain is within the range of 405-410mm standard road bike chain stay, suggest using more than 114 links, but not too short chain, or it might lead to too large back tension and enlarge the tooth tip resistance between chain and pulley wheels. (In case customer just has short chain, suggesting install it to lowest tension of spring mounting hole).

    It can faster SHIMANO system up and down gear to improve 20%-26%. save 2.4 watts more.

  • WhatsApp Online Chat !