17TSR System wheel kegedhen pulley
17TSR Carbon Fiber Bike samping Derailleur Pulleys Jockey Wheel Keramik Bearing Ultralight Player
* 12 / 17T guide ukuran sistem wheel set super gedhe
* Nyimpen 45% resistance chain gesekan dibandhingake gembong guide 11T "
* Versi prewangan Keramik nyimpen luwih saka 2.2 Watts daya saben dibandhingaké karo sistem transmisi asli
* Karbon Full guide serat lengen
* Full 7075 aluminium CNC nglereni guide entheng setir lan TC4 titanium alloy kumparan
*Color: Anode red, enamel, blue, gold, green
* 17TSR cocok kanggo SRAM saingan FORCE RED
* Keramik Bearing Version Sato Keramik Bearing Version nsk Steel Bearing Version
* Bobot: 63 gram
* Ing versi prewangan Keramik punika 1.2 gram korek saka versi prewangan baja
1.Different from other brands with eccentric designs, we designed these two products adopting the SRAM concentric design. The benefit of such design is that it won’t have any negative impact on neither the crisp shifting feel nor the tooth capability of the cassette nor
This is also the exact reason why Shimano ceased the production of 6800/9000 and upgraded their design to R8000/9100.
Therefore, we choose 12T/17T over 17T/17T.
Compared to original transmission system with 11T pulley, our products decrease friction resistance by 45%, ceramic bearing pulleys save more than 2.2 watts on average with each pedaling, increase shifting speed by 20-26%. Enhanced chain stability by implementing narrow-wide tooth upper pulley for more accurate and crisper shifting.
2.Extended tooth for lower pulley, to prevent chains from coming off.
One thing to clarify is that, it’s not wise to implement narrow-wide tooth to any situation.
Yes, narrow-wide tooth provides better stability, but it is achieved at the cost of more friction resistance. As designers and manufacturers, we aim to be adaptable, to provide different products for different occasions, to suit your need best, not bragging a certain “high tech” which looks fancy but brings negative impact for your experience.
3. Titanium alloy CNC shaft.
To pursue the goal of lightweight, we overcame as many obstacles as possible, even it’s just for 2-4 grams of improvement. Shafts of products for ETAP and mechanical are both made of 6/4 titanium alloy. Even in original SRAM products, titanium shafts are only available with RED RD, not even ETAP, ETAP shafts are made of steel.
4.Patent design for ultra-lightweight concentric upper pulley structure.
One 7075CNC screw to fasten 7 pieces. Easy to maintain or customize while remain light and durable.
Apa ngganti derailleur wheel pulley
Sepisanan, keropos watesan posisi spring bisa nyetel maneh tension umumé, nambah kekirangan babagan banget asli, lan nggawe munggah lan mudhun tension chain antarane guide setir lan cogs luwih layak.
Sareh, nomer kontak waos utawa kontrol nomer waos antarane chain lan cogs saka 17T derailleur mburi luwih sak pindah owah-owahan, iku kaya jiwitake tengah lan loro-lorone saka sawetara tabuh, sing luwih gedhe ing kontrol lever, kuwat daya kontrol.
Pamungkas, sawise mungkin ora nggambarake owahan kurva rotasi kandhang kang, ing jarak antarane wheel guide ndhuwur lan cogs wis apik.
1.Fist, find the screw of pulley wheel cage in the back of rear derailleur
2.Remove the screw with cross tip Screwdriver
3.Pull out the screw
4. Remove and grease the screw and spring before assembly the new 12-17T carbon cade
5. We suggest fix the spring in the left hole for the first time assembly
6. Grease the titanium axle before assembly new cage
7. Push the spring in the hole
8. Clockwise rotate the cage andpush into rear derailleur
9. Push all when make sure the positioning post right in the position
10. Push back the screw in the hole and fix with cross tip screwdrive
Concentric swing system.
SRAM has been on a different path when it comes to RD design. While Shimano and CP prefer eccentric structure, SRAM chooses concentric structure. With eccentric RD structure, the RD shifting suffers from the length difference of chain between different FD positions. If there is no FD, eccentric design is just perfect for the impact from the shifting curve from cassette to the chain length change, just like what SRAM has done for 1X system, which fulfill both the need for speedy shifting and stability.
The new Shimano DA9100 and R8000 are implementing concentric upper pulley design, which is just another example of the excellency of such design, the relatively fixed position of the upper pulley prevents negative impacts from both jumpy surface and FD shifting, ensures the accuracy and speed of RD shifting.