17TR Oversized pulley wheel System manufacturers and suppliers | Kactus

17TR Negabaritinių skriemulys ratų sistema

Trumpas aprašymas:

17TR Bicycle Ceramic Bearing Carbon fiber Jockey Pulley Wheel Set Rear Derailleurs Guide Wheel Product description *17T large size guide wheel set system *17T pulleys or16T pulleys *Saves 60% chain friction resistance compared to 11T guide wheels” *Ceramic bearing version saves more than 2.4 watts of average power compared to the original shifting system *Full carbon fiber cage *Full 7075 aluminum alloy CNC cutting lightweight guide wheel and shaft pin *Color: Anode red, enamel, blue, ...


  • FOB kaina: US $ 0.5 - 9999 / vnt
  • Minimalus užsakymas Kiekis: 100 Piece / vnt
  • Tiekimo Galimybė: 10000 Pjesė / vienetų per mėnesį
  • Prievadas: Šendženas
  • Mokėjimo sąlygos: L / C, D / A, D / P, T / T
  • Prekės detalės

    design concept

    Prekės žymės

    17TR Dviračių Keramikos Guolis Anglies pluošto gudrumu Skriemulys Ratų rinkinys Galiniai perjungikliai vadovas Ratų

    b161a3b7

    Prekės aprašymas

    * 17T didelis dydis vadovas ratų komplektas sistema

    *17T pulleys or16T pulleys

    * Išsaugo 60% atsparumą grandinės trinties, palyginti su 11T ratus "

    * Keraminiai guolis versija taupo daugiau nei 2,4 vatų vidutinės galios, palyginti su pradiniu perjungimo sistema

    * Visas anglies pluošto narvas

    * Visas 7075 aliuminio lydinio CNC pjovimo lengvas instrukciją rato ir veleno kaištis

    *Color: Anode red, enamel, blue, gold, green

    *17TR is suitable for Shimano 6700/6770/6800/6870/9000/9070 Ultegra/DURA ACE

    * Keraminiai Guolis Versija Nerūdijančio plieno Hibridinis Guolis Versija plieno Turint versija

    * Svoris: 61.4g

    * Jis keramikos guolis versija yra 1.2 gramų lengvesnis nei plienas Bearing versija

    *Shifting speed increased by 20%-26% for Shimano systems.

    *Support up to 11-28 cassettes, compatible with 11-30 and 11-34 with the help of an RD extender.

    This is the fastest RD pulley system.

     

    17TS & 17TR installation tips:

    1, due to increased offset by the oversized pulley system, please make sure your RD and frame are aligned and calibrated correctly.

    2, please check the length of your chain. Here is how to calculate, chain should be 10-20mm longer than the RD at 0 tension (shown as the picture below) when rests on the smallest chainring and smallest cog.

    3, to lower the requirements for chain length and RD/frame alignment, we introduce the new 16T pulley system, 17TS and 17TR. Compare with 17T, the power saving would be lowered by about 0.2 watts but increasing chain stability and shifting speed.

    图片1

    Kodėl pakeisti pavarų perjungiklio skriemulį ratą

    Pirma, akytas pavasarį pozicija riba gali reguliuoti atgal įtampą daugiausia, tobulinti originalią silpna ruožas silpnumą, ir padaryti aukštyn ir žemyn grandinės įtampa tarp kreiptuvo rato ir krumplinių pavarų daug tinkamai.

    Antra, kontaktinis dantų numeris arba kontrolės dantų skaičius tarp grandinės ir pardavimų savikainos galinio pavarų perjungiklio 17T yra per pavarų perjungimo, jis tiesiog patinka suimkite vidurį ir dvi puses kai kurių lazdelių, tuo didesnis valdymo svirtis, tuo stipresnis valdymo galią.

    Galiausiai, po pertvarkyti narvą sukimosi kreivė, atstumas tarp viršutinio kreiptuvo rato ir krumplių pagerėjo.

     

    Montavimo žingsniai

    image00111

    1. Galinis pavarų perjungiklis, skilimas, pašalinti originalią skriemulys rato narve, kaip parodyta paveikslėlyje (originalas skriemulys ratų narvas buvo ištrintas, šalinimo metodas prašome kreiptis į išsiaiškinti Nr.20)

    image00311

    2. Atkreipkite patvirtinti aliuminio lydinio žiedo kitą šoninis paviršius.

    image00511image00711

    3. Pagrindinis varžtas tarpiklis.

    image00911

    4. Įdiekite nailono poveržlę prie galinio pavarų perjungiklio.

    image01111

    5. Tvirtinimo pagrindinį varžtą tarpiklį į varžto ir sutepkite.

    image01311

     

    6. Paimkite 17T anglies pluošto skriemulys rato narvas, naudoti Nr 2 veržliaraktis pašalinti lydinio išspausti dėl skriemulys rato narvas nugaros.

     

     

    image01511

    7. Pašalinti viršutinę skriemulį ratą.

    image01711

    8. Nuėmus viršutinę skriemulį ratą, įdiegti centras varžtus ant nugaros.

    image01911

    9. Prieš montuodami pagrindinis varžtas, varžto turėtų būti visiškai sutepti.

    image02111

    10. visiškai Push pagrindinį varžtą į skriemulio ratų narve bazę.

    image02311

    11. Atkreipkite patvirtinti lydinio žiedo griovelio paviršių į pagrindinį varžto, ir griovelis paviršius sutepti.

    image02511

    12. Atkreipkite patvirtinti lydinio žiedo plokštuma į išorę, ir lydinio žiedas sutepti.

    image02711

    13. Prašome patvirtinti spyruoklės tvirtinimo skylę galinio pavarų perjungiklio.

    image02911

    14. Spyruoklinis kaištis suderinimas spyruoklė montavimas skylės, į galinio pavarų perjungiklio.

    image03111

    15. Patvirtinkite spyruoklės kaištį į kratymą pozicionavimo skylę bazę.

    image03311

    16. įdiegti spyruoklę.

    image03511

    17. lygiavimas spyruoklės kaištį su skyle skriemulys rato narvas

    image03711

    18. pažymėti nuo 1 iki 4 yra įtempimo reguliavimo skylė, numatytąją pradinis tvirtinimas yra skylė 2. (įtampos: 4> 3> 2> 1)

    image03911

    19. skriemulys ratų narvas nuspaudžiamas iki galo į galinio pavarų perjungiklio. patvirtina pagrindinius varžto derinimą.

    image04111

    20. Nr 4 veržliaraktis priveržti pagrindinį varžtą į 4N.m.

    image04311

    21. Iš naujo nustatyti viršutinę instrukciją ratą, įterpti viršutinius skriemulių varžtus, bet ne priveržti.

    image04511

    22. pasukimas skriemulys rato varžos į galinio pavarų perjungiklio atoveiksmio ribinės bloko, paspauskite topupper skriemulys rato varžtą iš, blokuoja ribinę bloką.

    image04711

    23. Priveržkite viršutinę skriemulys rato varžtų.

    image04911

     

    24. diegimas bus baigtas.


  • Ankstesnis:
  • Kitas:

  • According to test result, increase the rear derailleur pulley wheel size could significantly decrease the friction between the chain plates caused by polygon effects during chain bending, and reduce the resistance for saving rider’s cycling power.

    The chain is composed of several short pieces with an inch long, we could see the chain as one inch long with around one hundred and ten section lines, due to small diameter of turning circle, when the lines pass through standard 11T pulley wheel, it needs a certain angle to turn the transferring direction of chain for about 180° through two wheels, after increasing the pulley wheel size, the chain turning angle are decreased, so the loss of friction is less correspondingly. The results shows that 17T is a good balance point between weight and decreasing the polygon effects, To increase the size blindly will lead to arc decreasing not obvious, together with weight and volume adding. Compared with common 11T pulley wheel, the friction loss caused by polygon effects of chain could be decreased about 60%.

    Besides, under the same transferring speed of chain, the axis rotation speed of 17T is slower for saving the self friction loss during bearing rotation, smaller cycle could also reduce the resistance of each turn rotation. To upgrade this ceramic bearing saves more power loss.

    Faster gear shifts. firstly, porous spring position limit could adjust back tension largely, improve the weakness of original weak stretch, and make the up and down chain tension between guide wheel and cogs much more adequately.

    Antra, kontaktinis dantų numeris arba kontrolės dantų skaičius tarp grandinės ir pardavimų savikainos galinio pavarų perjungiklio 17T yra per pavarų perjungimo, jis tiesiog patinka suimkite vidurį ir dvi puses kai kurių lazdelių, tuo didesnis valdymo svirtis, tuo stipresnis valdymo galią.

    Galiausiai, po pertvarkyti narvą sukimosi kreivė, atstumas tarp viršutinio kreiptuvo rato ir krumplių pagerėjo.

    And we should also tell customer that the compatibility of 11-28T cogs, the length of chain is within the range of 405-410mm standard road bike chain stay, suggest using more than 114 links, but not too short chain, or it might lead to too large back tension and enlarge the tooth tip resistance between chain and pulley wheels. (In case customer just has short chain, suggesting install it to lowest tension of spring mounting hole).

    It can faster SHIMANO system up and down gear to improve 20%-26%. save 2.4 watts more.

  • WhatsApp Online Chat !