17TS Oversized pulley wheel System manufacturers and suppliers | Kactus

ബൃഹത്തായ കപ്പി വീൽ സിസ്റ്റം ൧൭ത്സ്

ഹൃസ്വ വിവരണം:

Bicycle Rear Derailleur Pulley Road Bike 17TS For Shimano Product description *17T large size guide wheel set system *17T pulleys or16T pulleys *Saves 60% chain friction resistance compared to 11T guide wheels” *Ceramic bearing version saves more than 2.4 watts of average power compared to the original shifting system *Full carbon fiber cage *Full 7075 aluminum alloy CNC cutting lightweight guide wheel and shaft pin *17TS is suitable for Shimano 5800/5700/4700 /4600 105/Tiagra *Ceramic...


  • കമന്റൊക്കെ വില: യുഎസ് $ 0.5 - 9,999 / ഭാഗം
  • മിന്.ഒര്ദെര് ക്വാണ്ടിറ്റി: 100 ഭാഗം / ഭാഗങ്ങൾ
  • വിതരണ കഴിവ്: പ്രതിമാസം 10,000 ഭാഗം / ഭാഗങ്ങൾ
  • പോർട്ട്: ഷേന്ഴേൻ
  • പേയ്മെന്റ് നിബന്ധനകൾ: എൽ / സി, ഡി / എ, ഡി / പി, ടി / ടി
  • ഉൽപ്പന്ന വിശദാംശം

    design concept

    ഉൽപ്പന്ന ടാഗുകൾ

    Bicycle Rear Derailleur Pulley Road Bike 17TS For Shimano

    72680401

    ഉൽപ്പന്ന വിവരണം

    * ൧൭ത് വലിയ വലിപ്പം ഗൈഡ് വീൽ സെറ്റ് സിസ്റ്റം

    *17T pulleys or16T pulleys

    * സംരക്ഷിക്കുന്നു 60% ചെയിൻ ഘർഷണം പ്രതിരോധം ൧൧ത് ഗൈഡ് ചക്രങ്ങളുടെ അപേക്ഷിച്ച് "

    * സെറാമിക് പ്രസവം പതിപ്പ് യഥാർത്ഥ പിന്തിരിഞ്ഞു സിസ്റ്റം അപേക്ഷിച്ച് ശരാശരി വൈദ്യുതി 2.4 ലധികം വരുന്ന പവർ സംരക്ഷിക്കുന്നു

    * മുഴുവൻ കാർബൺ ഫൈബർ കൂട്ടിൽ

    * മുഴുവൻ 7075 അലുമിനിയം അലോയ് എസ്എല് വെട്ടി കനംകുറഞ്ഞ ഗൈഡ് വീൽ ചുവടും പിൻ

    * ൧൭ത്സ് ശിമനൊ ൫൮൦൦/൫൭൦൦/൪൭൦൦ / 4600 105 / തിഅഗ്ര അനുയോജ്യമായ

    * സെറാമിക് ബിയറിംഗ് പതിപ്പ് സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ ഹൈബ്രിഡ് സെറാമിക് ബിയറിംഗ് പതിപ്പ് സ്റ്റീൽ ബിയറിംഗ് പതിപ്പ്

    * ഭാരം: ൭൧.൪ഗ്

    * സെറാമിക് ബിയറിംഗ് പതിപ്പ് സ്റ്റീൽ ബിയറിംഗ് പതിപ്പിനേക്കാൾ 1.2 ഗ്രാം ഭാരം

    *Shifting speed increased by 20%-26% for Shimano systems.

    *Color: Anode red, enamel, blue, gold, green

    *Support up to 11-28 cassettes, compatible with 11-30 and 11-34 with the help of an RD extender.

    This is the fastest RD pulley system.

    17TS & 17TR installation tips:

    1, due to increased offset by the oversized pulley system, please make sure your RD and frame are aligned and calibrated correctly.

    2, please check the length of your chain. Here is how to calculate, chain should be 10-20mm longer than the RD at 0 tension (shown as the picture below) when rests on the smallest chainring and smallest cog.

    3, to lower the requirements for chain length and RD/frame alignment, we introduce the new 16T pulley system, 17TS and 17TR. Compare with 17T, the power saving would be lowered by about 0.2 watts but increasing chain stability and shifting speed.

    图片1

    എന്തുകൊണ്ട് ദെരൈല്ലെഉര് കപ്പി വീൽ പകരം

    ഒന്നാമതായി, പാറയി സ്പ്രിംഗ് സ്ഥാനം പരിധി വീണ്ടും ടെൻഷൻ വലിയതോതിൽ, വളരെ അധികം സ്പഷ്ടമായി ക്രമീകരിക്കാൻ കഴിഞ്ഞില്ല യഥാർത്ഥ ദുർബലമായ പരത്തുക ബലഹീനത മെച്ചപ്പെടുത്താനും അപ്പ് ഉണ്ടാക്കി ഗൈഡ് വീൽ കൗശലം തമ്മിലുള്ള ചെയിൻ ടെൻഷൻ ഇറങ്ങി.

    രണ്ടാമതായി, റിയർ ദെരൈല്ലെഉര് ൧൭ത് എന്ന ചെയിൻ, കൗശലം തമ്മിലുള്ള കോൺടാക്റ്റ് പല്ലു നമ്പർ അല്ലെങ്കിൽ നിയന്ത്രിക്കുക പല്ലു നമ്പർ ഗിയർ പിന്തിരിഞ്ഞു സമയത്ത് കൂടുതൽ, അത് ഇടത്തരം ചില വിറകു രണ്ടു വശവും, വലിയ നിയന്ത്രണം ലിവർ, ശക്തമായ നിയന്ത്രണം വൈദ്യുതി പിഞ്ച് ആഗ്രഹിക്കുന്നു.

    അവസാനമായി, ശേഷം, കൂട്ടിൽ ന്റെ ഭ്രമണാരേഖം പുനർരൂപകല്പന അപ്പർ ഗൈഡ് വീൽ കൗശലം തമ്മിലുള്ള ദൂരം മെച്ചപ്പെട്ടു ആണ്.

     

    ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

    ഇമഗെ൦൦൧൧൧

    റിയർ ദെരൈല്ലെഉര് കപ്പി വീൽ കൂട്ടിൽ ൧.രെമൊവെ: ഒരു നമ്പർ 2 ഹെക്സ് റെഞ്ച് ഉപയോഗിച്ച് കപ്പി വീൽ കൂടിന്റെ അടിസ്ഥാന ഭാഗത്തു ഒരു ഹെക്സ് സ്ക്രൂ നീക്കം. (യഥാർത്ഥ കപ്പി വീൽ കൂട്ടിൽ ഫോട്ടോ നീക്കം ചെയ്തു)

    ഇമഗെ൦൦൩൧൧

    ഹെക്സ് സ്ക്രൂ ൨.രെമൊവെ, യഥാർത്ഥ കപ്പി വീൽ കൂടിന്റെ സ്പ്രിംഗ് നിന്നു എടുത്തു. (യഥാർത്ഥ കപ്പി വീൽ കൂട്ടിൽ ഫോട്ടോ നീക്കം ചെയ്തു)

    ഇമഗെ൦൦൫൧൧

    3. ൧൭ത് കാർബൺ ഫൈബർ കപ്പി വീൽ കൂട്ടിൽ, നിങ്ങൾ 8 ദ്വാരങ്ങൾ കാണാം 4 1 ൽ അടയാളപ്പെടുത്തിയ, ടെൻഷൻ ക്രമീകരണം ദ്വാരം, ഭാരം കുറയ്ക്കാൻ മറ്റ് നാല് ആണ്. സ്ഥിര പ്രാരംഭ ആളപായം ദ്വാരം ആണ് 2. (ടെൻഷൻ: 4> 3> 2> 1)

    ഇമഗെ൦൦൭൧൧

    സ്പ്രിംഗ് കുറ്റി ചെയ്തത് ൪.ഇംസ്തല്ല് തിരഞ്ഞെടുത്ത സ്പ്രിംഗ് മൌണ്ട് ദ്വാരങ്ങൾ. കപ്പി വീൽ കൂട്ടിൽ ന് സ്റ്റെയിൻലെസ്സ്-സ്റ്റീൽ കണ ഇൻസ്റ്റലേഷൻ മുമ്പ് സംഘടന വേണം.

    ഇമഗെ൦൦൯൧൧

    റിയർ ദെരൈല്ലെഉര് എന്ന കുഴിയിൽ കപ്പി വീൽ കൂട്ടിൽ ൫.പുശ്.

    ഇമഗെ൦൧൧൧൧

    , കപ്പി വീൽ കൂട്ടിൽ ൬.രൊതതിന്ഗ് റിയർ ദെരൈല്ലെഉര് ലെ കപ്പി വീൽ കൂട്ടിൽ ഞങ്ങള് പരിധി സ്ക്രൂ ബ്ലോക്ക് ക്രമീകരണം.

    ഇമഗെ൦൧൩൧൧

    7.റിയർ ദെരൈല്ലെഉര് അടിസ്ഥാന കയറി പൂർണ്ണമായി കപ്പി വീൽ കൂട്ടിൽ പുഷ്.

    ഇമഗെ൦൧൫൧൧

    8.നമ്പർ 2 ഹെക്സ് റെഞ്ച് ഉപയോഗിച്ച് റിയർ ദെരൈല്ലെഉര് ചുവട്ടിൽ ഭാഗത്തു കുഴിയിൽ ഹെക്സ് സ്ക്രൂ ചേർക്കുക.

    ഇമഗെ൦൧൭൧൧

    9.സ്ക്രൂ ശക്തമാക്കാനും.

    ഇമഗെ൦൧൯൧൧

    10.ആവർത്തിച്ചുള്ള റൊട്ടേഷൻ കപ്പി വീൽ കൂട്ടിൽ, സുഗമമായി ഞങ്ങള് സ്ഥിരീകരിക്കുക, ഇൻസ്റ്റലേഷൻ പൂർത്തിയായി.


  • മുമ്പത്തെ:
  • അടുത്തത്:

  • According to test result, increase the rear derailleur pulley wheel size could significantly decrease the friction between the chain plates caused by polygon effects during chain bending, and reduce the resistance for saving rider’s cycling power.

    The chain is composed of several short pieces with an inch long, we could see the chain as one inch long with around one hundred and ten section lines, due to small diameter of turning circle, when the lines pass through standard 11T pulley wheel, it needs a certain angle to turn the transferring direction of chain for about 180° through two wheels, after increasing the pulley wheel size, the chain turning angle are decreased, so the loss of friction is less correspondingly. The results shows that 17T is a good balance point between weight and decreasing the polygon effects, To increase the size blindly will lead to arc decreasing not obvious, together with weight and volume adding. Compared with common 11T pulley wheel, the friction loss caused by polygon effects of chain could be decreased about 60%.

    Besides, under the same transferring speed of chain, the axis rotation speed of 17T is slower for saving the self friction loss during bearing rotation, smaller cycle could also reduce the resistance of each turn rotation. To upgrade this ceramic bearing saves more power loss.

    Faster gear shifts. firstly, porous spring position limit could adjust back tension largely, improve the weakness of original weak stretch, and make the up and down chain tension between guide wheel and cogs much more adequately.

    രണ്ടാമതായി, റിയർ ദെരൈല്ലെഉര് ൧൭ത് എന്ന ചെയിൻ, കൗശലം തമ്മിലുള്ള കോൺടാക്റ്റ് പല്ലു നമ്പർ അല്ലെങ്കിൽ നിയന്ത്രിക്കുക പല്ലു നമ്പർ ഗിയർ പിന്തിരിഞ്ഞു സമയത്ത് കൂടുതൽ, അത് ഇടത്തരം ചില വിറകു രണ്ടു വശവും, വലിയ നിയന്ത്രണം ലിവർ, ശക്തമായ നിയന്ത്രണം വൈദ്യുതി പിഞ്ച് ആഗ്രഹിക്കുന്നു.

    അവസാനമായി, ശേഷം, കൂട്ടിൽ ന്റെ ഭ്രമണാരേഖം പുനർരൂപകല്പന അപ്പർ ഗൈഡ് വീൽ കൗശലം തമ്മിലുള്ള ദൂരം മെച്ചപ്പെട്ടു ആണ്.

    And we should also tell customer that the compatibility of 11-28T cogs, the length of chain is within the range of 405-410mm standard road bike chain stay, suggest using more than 114 links, but not too short chain, or it might lead to too large back tension and enlarge the tooth tip resistance between chain and pulley wheels. (In case customer just has short chain, suggesting install it to lowest tension of spring mounting hole).

    It can faster SHIMANO system up and down gear to improve 20%-26%. save 2.4 watts more.

  • WhatsApp Online Chat !