High Quality Stylish Design 17T All Set Carbon Fiber Derailleur Pulley
Produk Beskrywing
*Suitable for SHIMANO DA9100 DA9150 R8000 R8050 transmission
* 12 / 17T super groot grootte gids wiel stel stelsel
*Saves 45% chain friction resistance compared to 11T guide wheels
* Keramiek dra weergawe spaar meer as 2,2 watt van gemiddelde krag in vergelyking met die oorspronklike oordrag stelsel
* Vol koolstofvesel hok
* Vol 7075 aluminium CNC sny liggewig gids wiel en TC4 titanium legering spil
*Color: Anode red, enamel, blue, gold, green
*Ceramic bearing version Ceramic Bead Bearing Version NSK Steel Bearing Version
*Weight: 17TH: 55g
*The ceramic bearing version is 1.2 grams lighter than the steel bearing version
Kactus TECH concentric swing cage system adopts single aluminum alloy bolt fasten solution. It is lighter and easier for end-users. Titanium alloy shaft fastened to the aluminum alloy base, evenly distributing the force to the entire carbon fiber plate. shifting speed increased by 20%-26%.
Hoekom vervang derailleur katrol wiel
Eerstens, kan poreuse lente posisie limiet terug grootliks te pas spanning, die verbetering van die swakheid van oorspronklike swak rek, en maak die op en af ketting spanning tussen gids wiel en ratte baie meer voldoende.
In die tweede plek, die kontak tand nommer of beheer tand nommer tussen ketting en ratte van derailleur 17T is meer tydens rat verskuiwing, is dit net graag die middel en twee kante van 'n paar stokke, hoe groter die beheer hefboom, hoe sterker is die beheer krag knyp.
Laastens, nadat herontwerp die hok se rotasie kurwe, is die afstand tussen die boonste gids wiel en die ratte verbeter.
stappe installasie
1. First,find the screw of pulley wheel cage in the back of rear derailleur.
2. Remove the screw with T10 screwdriver.
3. Pull out the screw.
4. Remove and grease the screw and spring before assembly the new 12-17T carbon cage.
5. We suggest fix the spring in this hole
6. Grease the titanium axle before assemble new cage.
7.Push the spring in the hole.
8. Clockwise rotate the cage and push into rear derailleur. Push all when make sure the positi-oning post right in the position.
9. Push back the screw in the hole and fix with T10 screwdrive.
10. Finsh.
