17TSR karbon fiber Bisiklet Arka Derailleur Kasnaklar destek tekeri Seramik Ultra Hafif Bisiklet Rulman
Ürün Açıklaması
* 12 / 17T süper büyük boy kılavuz tekerlek seti sistemi
* “11T kılavuz tekerleklere oranla% 45 zincir sürtünme direncini kaydeder
* Seramik rulman versiyonu orijinal iletim sistemine kıyasla ortalama gücün fazla 2,2 watt kaydeder
* Tam karbon fiber kılavuz kolu
* Tam 7075 alüminyum alaşımı CNC kesim hafif kılavuz tekerlek ve TC4 titanyum alaşımı iğ
*Color: Anode red, enamel, blue, gold, green
* SRAM RAKİP KUVVET RED için uygun 17TSR
Sürüm Rulman * Seramik Rulman Sürüm Hibrid Seramik Rulman Sürüm NSK Çelik
* Ağırlık: 63 gram
* Seramik taşıyan versiyonu çelik taşıyıcı sürümüne göre 1.2 gram hafif olan
1.Different from other brands with eccentric designs, we designed these two products adopting the SRAM concentric design. The benefit of such design is that it won’t have any negative impact on neither the crisp shifting feel nor the tooth capability of the cassette nor
This is also the exact reason why Shimano ceased the production of 6800/9000 and upgraded their design to R8000/9100.
Therefore, we choose 12T/17T over 17T/17T.
Compared to original transmission system with 11T pulley, our products decrease friction resistance by 45%, ceramic bearing pulleys save more than 2.2 watts on average with each pedaling, increase shifting speed by 20-26%. Enhanced chain stability by implementing narrow-wide tooth upper pulley for more accurate and crisper shifting.
2.Extended tooth for lower pulley, to prevent chains from coming off.
One thing to clarify is that, it’s not wise to implement narrow-wide tooth to any situation.
Yes, narrow-wide tooth provides better stability, but it is achieved at the cost of more friction resistance. As designers and manufacturers, we aim to be adaptable, to provide different products for different occasions, to suit your need best, not bragging a certain “high tech” which looks fancy but brings negative impact for your experience.
3. Titanium alloy CNC shaft.
To pursue the goal of lightweight, we overcame as many obstacles as possible, even it’s just for 2-4 grams of improvement. Shafts of products for ETAP and mechanical are both made of 6/4 titanium alloy. Even in original SRAM products, titanium shafts are only available with RED RD, not even ETAP, ETAP shafts are made of steel.
4.Patent design for ultra-lightweight concentric upper pulley structure.
One 7075CNC screw to fasten 7 pieces. Easy to maintain or customize while remain light and durable.
Neden attırıcı kasnak tekerleği değiştirmek
İlk olarak, gözenekli yaylı pozisyon limiti, büyük ölçüde gerilimlerinin ayarlamak orijinal zayıf streç zayıflığını arttırmak ve yukarı ve çok daha yeterli bir kılavuz teker ve dişlerin arasındaki zincir geriliminin aşağı yapabiliriz.
İkinci olarak, arka değiştirici 17T zinciri ve dişlerin arasındaki temas diş sayısı ya da kontrol diş sayısı daha vites değiştirme sırasında, sadece orta ve bazı çubuklar iki tarafı, daha güçlü, kumanda kolu daha büyük bir kontrol gücü çimdik gibi.
Son olarak, daha sonra kafesin dönme eğrisi yeniden, üst kılavuz tekerlek ve dişlerin arasındaki mesafe artırıldı.
Kurulum adımları
1.Fist, find the screw of pulley wheel cage in the back of rear derailleur
2.Remove the screw with cross tip Screwdriver
3.Pull out the screw
4. Remove and grease the screw and spring before assembly the new 12-17T carbon cade
5. We suggest fix the spring in the left hole for the first time assembly
6. Grease the titanium axle before assembly new cage
7. Push the spring in the hole
8. Clockwise rotate the cage andpush into rear derailleur
9. Push all when make sure the positioning post right in the position
10. Push back the screw in the hole and fix with cross tip screwdrive
11. Finish
Concentric swing system.
SRAM has been on a different path when it comes to RD design. While Shimano and CP prefer eccentric structure, SRAM chooses concentric structure. With eccentric RD structure, the RD shifting suffers from the length difference of chain between different FD positions. If there is no FD, eccentric design is just perfect for the impact from the shifting curve from cassette to the chain length change, just like what SRAM has done for 1X system, which fulfill both the need for speedy shifting and stability.
The new Shimano DA9100 and R8000 are implementing concentric upper pulley design, which is just another example of the excellency of such design, the relatively fixed position of the upper pulley prevents negative impacts from both jumpy surface and FD shifting, ensures the accuracy and speed of RD shifting.
